Symantec Backup Exec System Recovery v8.0.3.28325

Symantec Backup Exec System Recovery 8
is the gold standard in complete Windows system recovery with the
ability to restore systems in minutes, not hours or days, even to
dissimilar hardware or virtual environments. It features flexible
offsite protection and enhanced recovery capabilities, integration with
Symantec security and systems management solutions, and support for
Windows Server 2008.



Key Features

* Dissimilar hardware restoration with Restore Anyware technology
* Comprehensive virtual conversion capabilities directly to VMDK or VHD files
* Offsite backup copy to FTP location or secondary disk drive for enhanced disaster recovery capabilities
* Granular recovery of Exchange, SharePoint or files and folders from a
single, multi-tab interface (via the Granular Restore Option)

Key Benefits

* Easily meet strict recovery time objectives (RTOs) by recovering complete systems in minutes, even from a bare-metal state
* Eliminate backup windows by capturing the entire live Windows system,
without disrupting user productivity or application usage
*
Innovative multi-product integration with market-leading technologies
including Symantec ThreatCon and Altiris Notification Server
*
Centrally manage backup and recovery tasks for multiple servers across
your entire organization (via Backup Exec System Recovery Manager)

Operating Systems Supported
Windows 32-bit or 64-bit operating systems:

* Windows Server 2008
* Windows Server 2003
* Windows 2000 Server (SP4 or later)
* Windows 2000 Advanced Server (SP4 or later)

Processor

* 233 MHz or greater, as required by the operating system

RAM Requirements for All Platforms
Memory requirements per key components:

* Backup Exec System Recovery Agent: 256 MB
* Backup Exec System Recovery user interface and Recovery Point Browser: 256 MB
* Symantec Recovery Disk: 512 MB minimum (dedicated), or 768 MB minimum
(dedicated) for the multilingual version of the Symantec Recovery Disk
* Backup Exec System Recovery LightsOut Restore: 1 GB

Available Hard Disk Space

* Approximately 250-300 MB for the entire product, depending on the language of the product you are installing
* Microsoft .NET Framework 2.0: 280 MB of hard disk space required for 32-bit computers, and 610 MB for 64-bit computers
* Recovery points: Sufficient hard disk space on a local hard disk or network server for storing recovery points
* Backup Exec System Recovery LightsOut Restore: 2 GB

CD-Rom or DVD-ROM Drive

* The drive can be any speed, but it must be bootable from the BIOS in
order to boot the Symantec Recovery Disk CD-ROM. Backup Exec System
Recovery uses Gear Software technology. To verify that your CD writer
or DVD writer is compatible, visit [ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط] You can
look up information about your writer if you know the name of the
manufacturer and model number of your writer.

Software

* The .NET Framework 2.0 is required to run Backup Exec System
Recovery. If the .NET Framework is not already installed, Backup Exec
System Recovery initiates a prompt to install it for you.

Virtual Platforms (for converted recovery points)

* VMware ESX Server 2.5 and 3.0
* VMware Infrastructure 3 (replacement/rename for ESX Server)
* VMware GSX Server 3.1 and 3.2
* VMware Server 1.0 (replacement/rename for GSX Server)
* VMware Workstation
* Microsoft Virtual Server 2005 R2

Symantec Backup Exec System Recovery Granular Restore Option
Processor

* Intel Pentium® class or better

Operating Systems Supported

* Windows Vista (Ultimate, Business)
* Windows XP Professional (SP1 or later)
* Windows 2000 Professional (SP4 or later)
* Windows Small Business Server 2000 or Small Business Server 2003
* Windows 2000 Server/2000 Advanced Server (SP4 or later)
* Windows Server 2003
* Windows Server 2008

RAM Requirements

* 256 MB minimum

Available Hard Disk Space

* 35 MB

Software
You
must have the following software installed on your computer before you
install the Backup Exec System Recovery Granular Restore Option:

* Symantec Backup Exec System Recovery
* Microsoft Outlook 2003
* .NET Framework 2.0 (included in the Symantec Backup Exec System Recovery installation)

Symantec Backup Exec System Recovery Manager
Processor

* Intel Pentium III: 1 GHz or higher; Pentium 4: 3.0 GHz or higher recommended

Operating Systems Supported
Backup Exec System Recovery Manager Console

* Windows Vista Home Basic, Premium, Ultimate, Business
* Windows Server 2008
* Windows Server 2003 x64 Editions (SP1)
* Windows Server 2003 R2 Editions (SP1)
* Windows Server 2003 (SP1)
* Windows Small Business Server 2003 (SP1)
* Windows 2000 Advanced Server (SP4)
* Windows 2000 Server (SP4) and Update Rollup 1 for SP4
* Windows Small Business Server 2000 (SP4)
* Windows XP Professional x64 Edition (SP1)
* Windows XP Professional (SP1)
* Windows 2000 Professional (SP4)

Backup Exec System Recovery Manager Server

* Windows Server 2003 x64 Editions (SP1)
* Windows Server 2003 R2 Editions (SP1)
* Windows Server 2003 (SP1)
* Windows Small Business Server 2003 (SP1)

RAM Requirements
Memory requirements per key components:

* Backup Exec System Recovery Manager server: 1 GB
* Backup Exec System Recovery Manager console: Dependent on the operating system

Available Hard Disk Space
The hard disk space requirements for each component are as follows:

* Backup Exec System Recovery Manager console: 100 MB
* Backup Exec System Recovery Manager server: 750 MB
* Backup Exec Retrieve: 15 MB
* Microsoft .NET Framework 2.0: 280 MB (32-bit computers); 610 MB (64-bit computers)
* Storage space on the network for the recovery points

Software
Microsoft
.NET Framework 2.0 is required to run Backup Exec System Recovery
Manager and Backup Exec System Recovery on client computers. When you
start the Backup Exec System Recovery Manager console for the first
time, .NET is automatically installed if it does not already exist or
an older version exists.

* Note: Microsoft .NET Framework 2.0 must be installed on client computers before you install Management Control.

New Features
Innovative
technologies in Backup Exec System Recovery enable you to recover
complete Windows systems in minutes, not hours or days, making Backup
Exec System Recovery the gold standard in complete Windows system
recovery.
Offsite Backup Copy
Automatically copy recovery points
(backups) to a remote server using FTP or to an external hard drive or
network share to enhance your disaster recovery efforts.
Symantec ThreatCon Integration
Easily
configure Backup Exec System Recovery to automatically run a backup
when the Symantec ThreatCon level reaches or exceeds the level
specified. This feature ties directly into Symantec's global DeepSite
ThreatCon infrastructure.
Granular Recovery of Exchange, SharePoint and Other Individual Files and Folders
Backup
Exec System Recovery 8 Server Edition delivers many data recovery
capabilities, simplifying the recovery of Exchange, SharePoint, as well
as individual files and folders. Features include:

* Recovers
individual Exchange emails, SharePoint documents or files and folders
from a single interface with the Granular Restore Option (requires
additional purchase)
* Recovers individual files and folders in
seconds via the Granular Restore Option or through independent
file/folder backup capabilities
* Enables end-user recovery of
files and folders via Google Desktop or Backup Exec Retrieve using a
common web-browser interface for fast and simple recovery, without IT
intervention

Microsoft Server 2008 Support
Support
for Microsoft's latest Server Operating System, including Restore
Anyware technology for dissimilar hardware and P2V restoration.
USB Drive Identification
Backup
Exec System Recovery intelligently and uniquely communicates to USB
drives, running backup jobs to the given device even if the drive
letter changes.
Multi-TB Recovery Points
Create Recovery Points for volumes up to 16 TBs in size.
Integration with Altiris Notification Server 6.5
Manage
system backup tasks directly in Altiris Notification Server 6.5 using
Backup Exec System Recovery Integration Component for Altiris.
Continued Support for Dissimilar Hardware Restoration with Restore Anyware
Rapid
recovery of entire systems to dissimilar hardware breaks the barrier of
incompatible storage controllers and hardware abstraction layers,
thereby reducing recovery times and saving significant hardware
investments. Combines hot-imaging with the ability to restore to
different hardware platforms on the fly.

* NIC driver retargeting supports hardware-independent NIC drivers
* Perform complete hardware migrations with ease using Restore Anyware

Continued Virtual Support
Leverages
the power of virtualization, enabling seamless physical to virtual
(P2V) and virtual to physical (V2P) conversions for VMware ESX Server,
VMware Server (formerly GSX Server), VMware Workstation, and Microsoft
Virtual Server disk formats. Convert entire systems at once or select
volumes at a time.

* Easy-to-use, intuitive virtual conversion wizard allows for quick conversion directly to VMDK or VHD files
* Perform preflight testing of patches, installations, etc. in the
virtual environment before applying changes to production systems

Customizable Symantec Recovery Disk
Simplifies
and speeds system recovery by allowing IT administrators to build their
own recovery environment with drivers unique to their hardware needs.
It automatically harvests [ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط] system drivers from the system
on which the customizable SRD is being created. It also allows for
manual inclusion of additional 3rd party drivers with the ability to
burn to CD or .iso format.
Easy Remote System Recovery
Easily
restores servers in remote, unattended or distributed locations from a
desktop, laptop or Pocket PC using LightsOut Restore functionality. If
a server must be recovered from bare metal, you can reboot the server
remotely using the baseboard management controller and then accessing
the Symantec Recovery Disk stored on the system hard drive to perform a
full system restore using the built-in pcAnywhere host for connectivity.
Customizable Event Driven Recovery Points
Allows
users to specify executable(s) or .com files for which recovery points
should be triggered. Users can also select to automatically capture
recovery points prior to application installation, user logon or
logoff, and configurable storage utilization changes.



[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط] | Part1
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط] | Part2