[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط]Archicad 12 Software Collection (2008-2009) | 1.77 GBArchicad 12 Software Collection - This collection of programs, plug-ins
and video based on the Russian version of ArchiCAD 12, which is the
most comprehensive and flexible tool for information modeling buildings
(Building Information Modeling).
System requirements: Intel Pentium 4
1 GB of RAM is minimum, 2 GB or more - is recommended
Hard disk: 1 GB for full installation. 2 GB to work
Display: 1024x768 minimum, 1280x1024 or higher recommended
Video: Open GL and DirectX 9 compatible card with 256 MB or more memory.
ArchiCAD 12, without a doubt, strengthen the leadership program as the
most complete and flexible tools for information modeling buildings
(Building Information Modeling - BIM). When you create a new version of
the developers, the focus has traditionally focused on three areas:
speed, improved modeling tools, and improve the quality of
documentation.
Support for multiprocessor systems - the use of multiprocessor
computers with ArchiCAD 12 will significantly improve performance by
increasing the speed of navigation (for both 2D-documented, as well as
3D-window) and the generation of species of 3D-models (for example,
cuts to miscalculation shadows). And, of course, increases the overall
speed of the program, while at the same time - the comfort and
convenience.
Photos and shading - the new technology incorporated into the program,
significantly increase the speed of working with raster images and vast
fields shtrihovok as in the design, and in the generation and layout
drawings on the sheets. In addition, the increased rate of generation
of documentation in a PDF.
Hinged Wall - came in ArchiCAD 12 wall mounted tool opens new
possibilities for designing and documenting complex frame structures.
It is based on the latest technology ArchiCAD - System Technology,
which will be used in the design of composite systems. The essence of
this technology is that engineering design is presented in a
hierarchical structure (in this case - cutting design patterns,
components and additional accessories), and the user can easily monitor
and change any part of the wall, detail and develop the entire project
as a whole.
Box - allows users to work with slozhnokompozitnymi structures of walls
and ceilings, and quickly display only the carrier portion of the
design.
Overview of the major innovations:
Suspended facade systems. Options
Suspended facade systems. Creating and editing
Suspended facade systems. Options
Suspended facade systems. Creating and editing
Suspended facade systems. Connect with walls
Partial mapping of multilayer structures
Management-related modules
Changes in StairMaker
Offset / Alignment / uniform distribution of elements
Changes in dialogs /
Other improvements - Now users can select any objects in 2D-or 3D-form,
then move, align and distribute them in a space the same way as it is
in popular office applications (eg, extend the trees along the walking
track, to move through arrows on the keyboard kitchen table a few
centimeters to the left). This is convenient, fast and effectively!
Contents:
ArchiCAD 12 build 2325 RUS
Hotfix 3 (2420)
Hotfix 4 (2523)
Hotfix 5 (2675)
Tabletka to Build 2325, 2420, 2523, 2675.
ADDONS: 3DStudio In, Accessories, Library Accessories, Construction
Simulation, EDMIFC 2x2, Mesh to Roof, Interior Wizard, Intersections in
Combos, PolyCount, Check Duplicates, Profiler, RAL Colors, Objective
2.25, Zonematic12_Win, MEP Modeler for ArchiCAD 12, ArchiCAD Connection
Plug-In, Mediterran12, gbXML Shipping.apx.
Cadimagetools Suites collection 12.4
Cigraf
VirtualBuildingExplorer
A detailed description of the installation:
1) Run AC12-RUS.exe folder AC 12 RUS. Install a commercial version. All default.
2) After the installation (set Arcicad, WIBU, QuickTime, java) overrides the comp.
3) Set the update folder AC 12 RUS 2325 \ Update run AC12-2420.exe,
then install the AC12-2523.exe. After each update, overloading the
machine. Who needs a MEP next update does not take place and кряк
number 2523, who do not need a set AC12-2675-HOTFIX5.exe. If asked to
overload the machine after the updates - overloading. (MEP does not
work with the update of 2675 - how to tame it is not known yet).
4) From the folder AC 12 RUS \ Crack for Archicad take file
archicad.12.build.2675.update-patch.by.xZtexe and throws in the C: \
Program Files \ Graphisoft \ ArchiCAD 12. Run it and patch. (Updates
are spread as кряки for each of the updates. If someone does not become
either an update on the previous version, and to cure any version. Main
properly applied.)
5) Open the folder AC 12 RUS \ Addons \ Cadimage and run
Cadimage_Tools_Installer.exe. Be sure to check the installation path.
They should all be in a folder Archicad 12.
6) Open the folder AC 12 RUS \ Addons \ Cadimage \ Crack run file
cadimage.tools.12.x.universal.patch.by.xztexe, click on a patch
find the file in the directory C: \ Program Files \ Graphisoft \
ArchiCAD 12 \ Add-Ons \ CadimageTools - "open". Wait until the patch
established. Close patch.
7) Copy the folder from the list AC 12 RUS \ Addons \ Addons for
Archicad in the folder C: \ Program Files \ Graphisoft \ ArchiCAD 12 \
Extensions ArchiCAD. Copy the folder gbXMLShippingWin12, from the list
of AC 12 RUS \ Addons \ GBXML, AC 12 RUS \ Addons \ Objective 2.25 of
the catalog AC 12 RUS \ Addons \ Objective 2.25, Zonematic12_Win from
the list AC 12 RUS \ Addons in C: \ Program Files \ Graphisoft \
ArchiCAD 12 \ Extensions ArchiCAD.
8) Run the Setup.exe file in the folder AC 12 RUS \ Addons \ MEP and
install the first MEP Modeler for ArchiCAD 12, then ArchiCAD Connection
Plug-In. Connection Plug-In may not be on the flight characteristics of
Archicad, it is not affected. (But if it becomes available in the car
Autocad Mep)
9) Open the folder \ AC 12 RUS \ Addons \ MEP \ crk and copy files
graphisoft.mep.modeler.12.universal.patch.by.xZtexe and MEP Modeler.apx
in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD
\ MEP Modeler. On the issue of replacing - the affirmative. Starting
graphisoft.mep.modeler.12.universal.patch.by.xZtexe file and click
patch.
10) Open the folder \ AC 12 RUS \ Addons \ Objective 2.25 \ crk and
copy OBJECTiVE.apx in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \
Extensions ArchiCAD \ OBJECTiVEWinAC12 \ OBJECTiVE, but gbXML
Shipping.apx folder AC 12 RUS \ Addons \ GBXML \ crk in C: \ Program
Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \
gbXMLShippingWin12. On the issue of replacing - the affirmative.
11) Run the file in the folder Registration.reg AC 12 RUS \ Addons \
GBXML \ crk. Add data to the reest - yes. Run the file in the folder
Registration.reg AC 12 RUS \ Addons \ Objective 2.25 \ crk \ crk. Add
data to the reest - yes.
12) Run the file in the folder Mediterran12_installer_2008.exe AC 12
RUS 2325 \ Addons Installer and specify the folder C: \ Program Files \
Graphisoft \ ArchiCAD 12. Further, more .... OK!
13) Copy the contents of the folder AC 12 RUS \ Addons \ Cigraf in C: \
Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD. Then
take turns opening the folder and launch the file
cigraph.bundle.12.edu.23.02.09.patch.by.xZtexe. Click Patch and set on
a file with a. Apx. Develops a patch - exit. And so in each folder.
Files cigraph.bundle.12.edu.23.02.09.patch.by.xZtexe after being
subjected to possible poudalyat. They are the same everywhere, and I
throw them specifically to each folder that it matters less and
explanations.
14) Open the folder AC 12 RUS \ Addons \ ArchiGlazing and run the file
Setup.exe. After installation copy the file ArchiGlazing.apx from the
same folder in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Add-Ons
\ Extras - replace.
15) Open the folder AC 12 RUS \ VBExplorer_106690_AC12 \ Install and
run the file Setup.exe. After installation, open the folder AC 12 RUS \
VBExplorer_106690_AC12 \ ENGiNE and copy VBE_LicenseManager.exe and
VBE.exe in C: \ Program Files \ Graphisoft \ Virtual Building Explorer.
File Engine.zzz copy C: \ Program Files \ Graphisoft \ Virtual Building
Explorer \ System. File VirtualBuildingExplorer.apx copy C: \ Program
Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \ Virtual
Building Export (if this folder is not there a way that - ArchiCAD 12 \
Add-Ons \ Virtual Building Export \).
16) Open the folder \ AC 12 RUS \ Addons folder and copy in the Bibl
ArchiCAD 12 \ ArchiCAD Library 12. (not yet understand that the beast)
17) Open the folder AC 12 RUS \ Addons folder and copy
Doublecheck12_Win in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \
Extensions ArchiCAD \.
18) Run LIB12-RUS-Win.exe folder AC 12 RUS. This update of library items.
19) Run the Archicad, create a new project. Then walk along the path
parameters / Manager extensions / edit the list of available extensions
/ Find extension. Open the folder C: \ Program Files \ Graphisoft \
ArchiCAD 12 \ Add-Ons \ CadimageTools and select all of it to expand
and "open." Truth have to restart the project. Now in the top menu bar
will be available tools Cadimage.
20) Enjoy!
Additional Information:
Do not let us update addons from Cigraf - instantly nakroetsya and ask
for a license. If you do not reinstall Archicad, but simply update - be
sure to replace the Addons folder AC 12 RUS \ Addons \ Addons for
Archicad in the folder C: \ Program Files \ Graphisoft \ ArchiCAD 12 \
Extensions ArchiCAD. The reason - with the release of a new Hotfix -
updated and expanded.
Contents:• Run the project and settings floors. Describes the creation and
preservation of the project, setting up floors.
• Installation of the design grid. We consider the setting and paste in the project design grid.
• Design of foundation. We show the design foundation cafe.
• Designing the basement floors. We consider how to build a foundation before closing overlapping.
• Designing walls of the ground floor. We show how to design the walls of the ground floor.
• Design of the first-floor ceilings. Demonstrate how to design the floor.
• Design of the crack under the staircase. We consider how to create
openings for stairs from 1 to 2 storey.
• Design the second floor. We show how to design a second floor by copying and pasting the first floor.
• Design of the first-floor windows. We consider how to create stained
glass windows in the front and side facades of the first floor of the
cafe.
• Completion of the first-floor windows. Demonstrate how to design the
three windows on the rear facade of the first floor of the cafe.
• Construction of arch stained glass. We show how to arched stained-glass window on the second floor.
• Completion of the second-floor windows. Let's learn how to design the six windows on the second floor.
• Construction of front doors. We show how to set up two front doors to enter the cafe.
• Construction of a service door. Let's learn how to build a service door in the cafe.
• Construction of internal doors. We show the construction of the doors inside the building the cafe.
• Building a porch. Demonstrate how to comply with a porch to the entrance to the cafe.
• Building a ladder platforms. We consider how to build staircases on first and second floors.
• Creation of a new staircase and its setting. We show how to create a
new staircase and set its parameters.
• Construction of stairs. We consider the construction of the stairs
first and second floors. In addition, we show how to view the work in
three-dimensional form.
• Construction of the roof. Demonstrate how to configure the tool Roof (Roof), and how to create a roof.
• Coverage of the roof tiles. We show how to create tiles and assign the same material the roof.
موضوع: Exclusive : Archicad 12 Software Collection (2008-2009) | 1.77 GB 
الجمعة 10 يوليو - 3:37
